Kawasaki Ninja 250R Special Edition 2013

KAWASAKI'S PROFILATION OF THIS BIKE

With a stunning full-fairing based on the same design as the Ninja ZX-10R supersport model, a single kicked up muffler, UNI-TRAK rear suspension, high performance petal disc brakes, a dual seat and impressive user friendly performance, the Ninja 250R packs a whole lot of punch and real, big bike features into a really small package.

SPECS OF KAWASAKI NINJA 250R SPECIAL EDITION

General information
Model:	Kawasaki Ninja 250R Special Edition
Year:	2013
Category:	Sport
Rating:	Do you know this bike? Click here to rate it. We miss 1 vote to show the rating.
Engine and transmission
Displacement:	249.00 ccm (15.19 cubic inches)
Engine type:	Twin, four-stroke
Compression:	11.6:1
Bore x stroke:	62.0 x 41.2 mm (2.4 x 1.6 inches)
Fuel system:	Carburettor. Keihin CVK30 x 2
Fuel control:	DOHC
Ignition:	TCBI with digital advance
Cooling system:	Liquid
Gearbox:	6-speed
Transmission type, final drive:	Chain
Driveline:	O-ring chain
Exhaust system:	Upswept muffler and the 2 into 1 exhaust design
Chassis, suspension, brakes and wheels
Frame type:	Semi-double cradle, high-tensile steel
Rake (fork angle):	26.0°
Front suspension:	37mm hydraulic telescopic fork / 4.7 in.
Rear suspension:	Bottom-link Uni-Trak with 5-way adjustable preload / 5.1 in.
Front tyre dimensions:	110/70-17
Rear tyre dimensions:	130/70-17
Front brakes:	Single disc. Hydraulic petal disc with two-piston caliper
Front brakes diameter:	290 mm (11.4 inches)
Rear brakes:	Single disc. Petal disc with two-piston caliper
Rear brakes diameter:	220 mm (8.7 inches)
Physical measures and capacities
Weight incl. oil, gas, etc:	170.1 kg (374.9 pounds)
Seat height:	775 mm (30.5 inches) If adjustable, lowest setting.
Overall height:	1,110 mm (43.7 inches)
Overall length:	2,085 mm (82.1 inches)
Overall width:	714 mm (28.1 inches)
Wheelbase:	1,400 mm (55.1 inches)
Fuel capacity:	18.17 litres (4.80 gallons)
Other specifications
Starter:	Electric
Color options:	Lime Green
Further information
Parts and accessories	Our partner CMSNL ships low cost OEM motorcycle parts to Australia, Austria, Bahamas, Belgium, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, India, Ireland, Italy, Japan, Kuwait, Latvia, Lithuania, Luxembourg, Macedonia, Malta, Montenegro, The Netherlands, New Zealand, Norway, Poland, Portugal, Serbia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Ukraine, United Kingdom, The United States and more. Or check out parts and accessories from our other partners.
Ask questions	Join the 13 Kawasaki Ninja 250R Special Edition discussion group.
Insurance, loans, tests	Check out insurance here. Search the web for dealers, loan costs, tests, customizing, etc.
Related bikes	List related bikes for comparison of specs

Facts you need to know about Kawasaki Ninja

Here's my thoughts about Kawasaki Ninja 250R.

The Kawasaki Ninja 250R (previous generations had market-specific names) is a motorcycle originally introduced by Kawasaki in 1983. As the marque's entry-level sport bike, the motorcycle has undergone few changes throughout its quarter-century lifetime, having received only two substantial redesigns.

NOMENCLATURE
Since 2008, the bike is marketed as the Ninja 250R in all markets. It is also referred to by its platform designation, EX250, to which a generational suffix is attached. In the United States, previous models (EX250-E/F/G/H) were already being marketed as members of the Ninja family of sport bikes, while outside of the U.S. the bike was known variously as the ZZR-250, ZX-250, or as the GPX-250R. One of the earliest models, the EX250-C, was given the name GPZ-250.

MODEL HISTORY
The Ninja 250R's particular ergonomics, chassis design, and engine placement have resulted in a motorcycle that straddles the standard and sport classes. The Ninja's riding posture also falls between standard and sport.

>>1983
The first generation was produced between 1983 and 1984, and known by the production number EX250-C. It was sold as the GPZ-250. Sold only in its home market of Japan, this earliest, belt-driven version was first produced in 1983, and shares no commonality with later generations. The bike has 35mm fork tubes.

>>1986
Produced between 1986 and 1987 was the EX250-E. This model was sold as the Ninja 250R in Canada and the U.S. between 1986 and 1987. It was known as the GPZ-250R elsewhere. When originally introduced, it was more costly than the Honda Rebel, and reviewers complained that while the 14,000 rpm redline was nice, the engine was slow to rev.

>>1988
For the 1988 model year, there were both cosmetic changes and changes in engine tuning. While the bore and stroke, and other major engine components, were unchanged, minor tuning adjustments were made. The carburetor diameters were reduced 2 mm to 30 mm (1.2 in), the cylinder compression ratio was increased from 12.0:1 to 12.4:1, ignition timing advance was increased, and the rear sprocket was increased by three teeth to 45. Reviewers reported that this made the engine more free-revving, reaching the high 14,000 redline more quickly, and the tested top speed increased by a few miles per hour. The new, more fully enclosed bodywork was complimented for being stylish, at the time, and easily mistaken for the larger Ninja 750.

The third generation of production of the Ninja 250 encompassed three models:

• EX250-F - The most widespread EX250 variant, the E model was completely revamped and sold as the F model between 1988 and 2007 in the United States. Canada received the model between 1988 and 1999, and it was available elsewhere as the GPX-250R as early as 1987.
• EX250-G - Sold only in its home market of Japan, this version was known as the GPX-250R-II. It featured dual front brakes and a wider wheel and tire (110/80-16). All other parts were identical to the -F model. It was sold after 1988.
• EX250-H - This model came to Canada as the Ninja 250R between 2000 and 2002, after which it received a new name: ZZR-250, in line with the -H model's name elsewhere in the world, where it had existed since 1992. This motorcycle has parts in common with the -F model, though it shares the same engine, albeit with different casings. It sports a lateral aluminum frame, a different fairing (designed to make it look sportier), larger 17-inch wheels, an adjustable rear shock absorber, adjustable brake and clutch levers, a smaller drive sprocket, computer-controlled timing advance, and a revised electrical system. It also featured a smaller carburetor, & slightly different compression ratio, both of which were designed for quicker revving and slightly higher top end power. However, these upgrades came at a 6kg weight gain.

>>2008

In 2008, Kawasaki gave the EX250 its first big makeover after many years. The EX250-J model is known as the Ninja 250R worldwide, regardless of market.

Parts from the third generation are still found on the -J, but its redesigned exterior panels bring the Ninja's appearance out of the 1990s and into line with late-2000s sportbikes. The engine and drivetrain retain 30% of the -F model's parts, according to Kawasaki. The engine's compression and maximum torque have been lowered to provide better midrange performance. The redesign of the engine resulted in improvements in engine response at low engine speeds, and making the bike smoother and "much easier to ride.

Though the previous generation Ninja 250 had a peak power advantage of 1 to 5 hp (0.75 to 3.7 kW), the new version's 20 or 30 percent increase in mid-range power allows the bike to pull from 3,000 rpm where previously it had to be revved to 4,000 rpm. The U.S. -J model uses dual carburetors like the -F model, but the European, Brazilian and Thai models have fuel injection. The wheels were increased in size to 17 inches, the front suspension was improved, and the brake rotors were replaced with a larger petal shape. On the carbureted version, a fuel gauge was added in place of the temperature gauge. With the additional and redesigned equipment, the EX250-J suffered a 10 kg (22 lb) increase in wet weight over its predecessors.

With the arrival of the EX250-J, manufacturing continues to be located in Thailand.

>>2013

Kawasaki has announced that the 2013 model year Ninja 250R will have new bodywork, twin headlights, a digital instruments cluster, new wheels with a wider 140 mm (5.5 in) rear tire, and a reworked engine and exhaust. ABS will be available as an option. Like the previous generation, the engine will be fuel injected in some markets and carbureted in others. For 2013, in some markets, the Ninja 250R will be replaced by the 296 cc (18.1 cu in) Ninja 300, but the 250R will continue in other markets.